tp-p-4ms

(5.) TP-P-4MS je hidroizolacioni materijal, vodoodbojni i vodonepropustljivi, jednokomponentni, elastični transparentni premaz. Nanosi se četkom i koristi se za zaštitu unutrašnjih i spoljašnjih zidova od betona, opeke, kamena, maltera i gleta. Na akrilnoj je bazi.

 

  • SASTAV (5.) (TP-P-4MS): Akrilna vodorastvorna emulzija proizvedena od najkvalitetnijih sirovina. Zadovoljava najrigoroznije ekološke zahteve jer je proizveden na bazi netoksičnih komponenti i ne sadrži rastvarače. Izdržava temperaturne razlike od -70°C do +70°C.
  • FIZIČKO – HEMIJSKE KARAKTERISTIKE (5.) (TP-P-4MS):

Forma:……………………………………………………….. materijal je u tečnom stanju.

Tačka ključanja:…………………………………………………………………… oko 100°C.

Tačka zapaljivosti:………………………………………………………………… nezapaljiv.

Gustina:……………………………………………………………………………… 1,03gr/cm³

Rastvorljivost u vodi:………………………………. (ISO 8962) apsolutna na t=20°C

Ph – vrednost:……………………………………………………………….. (ISO 1148) 8-9

Dinamički viskozitet:…………………………… (ISO 2555) 4000-10,000 na t=20°C.

  • DELOVANJE NA PODLOGU (5.) (TP-P-4MS): Materijal je hemijski otporan na dejstvo sunca, morske vode, kiselih kiša, sumpordioksida, čađi, većinu alkalija kao i ostalih hemikalija uobičajeno prisutnih u veoma zagađenim sredinama. Poseduje izuzetnu prionljivost na tipične građevinske materijale (beton, kamen, opeka, malter, tarolit, čelične konstrukcije, bitumenske trake, itd..).

Materijal je bezbojan, ne menja postojeću boju površine na koju se nanosi, što je veoma važno kod izvođenja konzervatorskih radova.

(5.) (TP-P-4MS) vrši dvostruku zaštitu objekta: onemogućava prodor vlage u unutrašnjost objekta i njeno zadržavanje u porama zidova. Štiti zidove od štetnih agenasa iz vazduha i na taj način znatno produžava vek trajanja objekta. Viskozitet (TP-P-4MS) je takav da penetrira u materijal koji se štiti i ispunjava i najsitnije pore a istovremeno na površini formira veoma tanak, transparentan film koji ima vodoodbojnu funkciju. Svojim delovanjem sprečava izlučivanje soli na površinu zida i njeno taloženje na podlozi.

  • PRIPREMA PODLOGE I UGRADNJA (5.) (TP-P-4MS) : Podlogu dobro oprati i očistiti od svih nečistoća, a spojnice na kamenu i opeci propisno građevnski obraditi. Radna površina treba da se osuši na promaji. Izvršiti prvi premaz četkom od dlake ravnomerno po celoj površini sa (5.) (TP-P-4MS) . Nakon 24h izvršiti drugi premaz.
  • UTROŠAK (5.) (TP-P-4MS): Za jedan premaz troši se od 70 do 100gr/m², što zavisi od poroznosti podloge.
  • LAGEROVANJE (5.) (TP-P-4MS) : Maksimum 6 meseci na temperaturi između 5°C i 25°C.
  • EKOLOGIJA (5.) (TP-P-4MS) : Pripada EKO PROGRAMU.

tp-p-4ms karakteristike

Tržni centar u Parizu, enterijer i eksterijer obrađen TEXASPENETRATOM- PRIMARY PE STOP-4MS

 

Mikrofotografija delovanja na podlogu – kamen TEXASPENETRATA- PRIMARY PE STOP-4MS

 

(5.) (TP-P-4MS) je atestiran u Institutu za ispitivanje materijala RS, u Beogradu. Pri temperaturi nižoj od +5°C ili višoj od +30°C prekinuti ugradnju.

NAJKVALITETNIJA I NAJEKONOMIČNIJA HIDROIZOLACIJA. SAVESTAN INVESTITOR I DOBAR IZVOĐAČ GRAĐEVINSKIH RADOVA ZAŠTITIĆE FASADU SVOG OBJEKTA (PE STOPOM).

 

TP-PRIMARY-PE-STOP

(5) (TP-P-4MS)-(Waterprooofing material on acrylic base)

(5a) (TP-P-4MS)-(Waterprooofing material on solvent base)

(5) (TP-P-4MS)=(5a) (TP-P-4MS)

(5) (TP-P-4MS) is waterproof and water repellent, one-component, elestic, transparent coat on acrylic base. It can be easily applied by brush and it is using for protection of inside and outside walls made of concrete, stone, brick, mortar and glaze.

  • COMPOSTION OF THE (5) (TP-P-4MS): Acrylic watersoluble, emulsion manufactured of the top quality raw materials. It meets the strictest ecological requirements as it is manufactured of non-toxic components without solvents. It can resist temperature range from -70°C  +70°C.
  • PHYSICAL-CHEMICAL PROPERTIES OF (5) (TP-P-4MS): 

Consistency:…………………………………………………………………………….. Liquid.

Bioling point:…………………………………………………………………… About 100°C.

Burning point:……………………………………………………………. Non-inflammable.

Density:……………………………………………………………………………… 1,03gr/cm³

Water solubility:……………………………………….. (ISO 8962) absolute at t=20°C

Ph value:………………………………………………………………………. (ISO 1148) 8-9

Dynamic viscosity:…………………………….. (ISO 2555) 4000-10,000 AT t=20°C.

  • INFLUENCE ON SURFACE OF (5) (TP-P-4MS): Material is chemically resistant to the effects of sun, seawater, acid rains, sulphur-dioxid, charcoal, most of alkalis and other chemicals thet are common in highly polluted environment. It is extremely adherable to the usual building materials (comcrete, stone, brick, mortar, cement, tilles, steel constructions, bitumen strips etc.).

Material is practically transparent and therefore it does not change existing color of the surface where applied, which is very important for conservatory works.

(5) (TP-P-4MS) protects objects in two ways: prevents penetration of moisture into the objects and its retaining in the wall pores. Protects walls against demaging agents from air and in this way makes the object life much longer. Viscosity has been adjusted in such manner so that it can penetrate into the material to be protected and to close the tiny pores and, in the same time to form the very thin trensparent water repellent film. It also prevents appearence of salts on the wall surface and its depositing on it.

  • PREPERATION OF THE SURFACE AND APPLICATION OF (5) (TP-P-4MS): Surface should be cleaned and washed well of any dirt, and joints on the stones and bricks has to be finished nicely. Working surface should be dried by druoght. Apply equally by hairbrush all over the surface first layer of (5) (TP-P-4MS). The second coat should be made 24hrs. after the first one. It is available detailed prospect meterial with the working technlogy.
  • COMSUMPTION OF (5) (TP-P-4MS): 70 do 100gr/m² for one layer (depending of the porousness of the surface).
  • STORAGE OF (5) (TP-P-4MS): Max. 6 months on the tempereture between 5°C and 25°C.
  • ECOLOGY OF (5) (TP-P-4MS): It is ecologically safe material.

TP-PRIMARY-PE-STOP_characteristics

 

TP-PRIMARY-PE-STOP_shopping centre

Shopping centre in Paris, exterior and interior treated with TEXASPENETRAT-PRIMARY PE STOP-4MS.

 

TP-PRIMARY-PE-STOP_MICROPHOTO

Microphoto of influence of TEXASPENETRAT-PRIMARY PE STOP-4MS on the stone base.

 

The top quality and the most economical waterproofing system. Conscientious investor and qualified contractor of the construction work will protect the outside walls (facade) of their object with the material (PE-STOP).